702.02F Cast-in-Place Concrete Piles  (Approved Types)

Effective 07/01/04

703.10G Concrete Single Box Culvert (Straight Wings-Square) (3-sheets)

Effective 10/01/09 

703.11G Concrete Single Box Culvert   (Flared Wings-Square) (3-sheets)

Effective 10/01/09 

703.12G Concrete Single Box Culvert  (Cut Section)

Effective 10/01/09 

703.13G Concrete Single Box Culvert
(Straight Wings-Skewed) (3-sheets)

Effective 10/01/09 

703.14G Concrete Single Box Culvert (Flared Wings-Skewed) (3-sheets)

Effective 10/01/09 

703.15C Concrete Single Box Culvert (Member Sizes and Reinforcements)
(23-sheets)

Effective 10/01/09 

703.37B Concrete Box Culverts (Exterior Wing Reinforcement) (2-sheets)

Effective 10/01/09 

703.38A Concrete Box Culverts (Cutting Details) (2-sheets)
Effective 10/01/09 

703.40G Concrete Double Box Structure (Straight Wings-Square) (2-sheets)

Effective 10/01/09 

703.41G Concrete Double Box Structure (Flared Wings-Square) (2-sheets)

Effective 10/01/09 

703.42G Concrete Double Box Structure  (Cut Sections) (2-sheets)

Effective 10/01/09 

703.43G Concrete Double Box Structure (Straight Wings-Skewed) (2-sheets)

Effective 10/01/09 

703.44G Concrete Double Box Structure (Flared Wings-Skewed)  (2-sheets)

Effective 10/01/09 

703.45B Concrete Double Box Structure (Member Sizes and Reinforcement)
(22-sheets)

Effective 10/01/09 

703.60E Concrete Box Structure Pipe Inlet
(English and Metric Sheets Combined)

Effective 07/01/01

703.80G Concrete Triple Box Structure (Straight Wings-Square) (2-sheets)

Effective 10/01/09 

703.81G Concrete Triple Box Structure (Flared Wings-Square) (2-sheets)

Effective 10/01/09 

703.82G Concrete Triple Box Structure (Cut Sections)(2-sheets)

Effective 10/01/09 

703.83G Concrete Triple Box Structure (Straight Wings-Skewed) (2-sheets)

Effective 10/01/09 

703.84G Concrete Triple Box Structure (Flared Wings-Skewed) (2-sheets)

Effective 10/01/09 

703.85B Concrete Triple Box Structure
(Member Sizes and Reinforcement)
(22-sheets)

Effective 10/01/09 

706.35H Bar Supports for Concrete Reinforcement

Effective 07/01/04

712.40J Steel Dams at Expansion Devices

Effective 07/01/04

725.00B Corrugated Metal Pipe Installation Methods (3-sheets)

Effective 07/01/06

725.31C Metal Curtain Wall and Metal Inlets

Effective 07/01/04

726.30F Culvert Installation Methods (2-sheets)

Effective 07/01/04

730.00C Corrugated Polyethylene and Polyvinyl Chloride

Pipe Installation Methods (2-Sheets)
Effective 01/01/05

731.00T Precast Manholes (2-sheets)

Effective 10/01/98

731.10R Precast Drop Inlet (8-sheets)

Effective 12/01/05

732.00P Flared End Section (2-sheets)

Effective 02/01/09

732.05C Beveled Pipe End Treatment (2-sheets)

Effective 07/01/04

732.10G Safety Slope End Section (3-sheets)

Effective 08/01/09